After the automatic placement machine has been running for a long time, the inside of the machine will be more or less worn, aged, and deformed, which will greatly affect the placement accuracy of the machine. Therefore, the machine must be maintained and maintained regularly, and the relevant parameters must be calibrated to ensure that the fully automatic placement machine operates at its best and produces high-qualification PCBA products.

PCBA processing

Check the suction nozzle to see if there is dirt, blockage, rupture, damage, etc. Cleaning or replacing the suction nozzle can effectively reduce the occurrence of material throwing by the machine. Clean the waste box, feeder and feeder base to prevent waste components in the waste box from overflowing into the equipment, and to prevent problems such as incorrect installation of the feeder and poor foundation. Cleaning of flying camera lenses. During the operation of the placement machine, if dust, stains and other foreign matter appear on the camera, it will directly affect the recognition effect of the flying camera and lead to serious material throwing. Check the vacuum filter to ensure that the air duct inside the chip head is clean, so that a vacuum that can absorb components can be formed normally. Finally, the X and Y-axis guide rails and screw rods are cleaned and oiled. After the placement machine has been running for a period of time, the surfaces of the guide rails and screw rods will be contaminated with dust, the lubrication will decrease, and the precision and stability will decrease. Therefore, the X and Y axis guide rails and screws need to be cleaned and oiled regularly.

We perform regular maintenance and upkeep on the machines to ensure that the machines and equipment are in the best condition for PCBA processing, and we complete customer order plans according to quality and quantity on time, so that customers can feel more confident and worry-free about us.